Deck-Drive™ DWP Stainless Steel Collated Screws

Vendor: Simpson Strong-Tie Type: Collated Screws

4.5' (1201 Reviews)

SKU: SSDWP212S305

$442.50

Shipping calculated at checkout.

Grade: 305 Grade

305 Grade 316 (Marine) Grade

Screw Length: #10 x 2 1/2"

#10 x 2 1/2" #10 x 3"

Box Qty: 1500

1500 1000

Stock adequate! Ready to ship

View Full Details

The Deck-Drive DWP collated screw system is a high-performance fastening solution designed for decks, docks, and general exterior projects that require superior corrosion resistance.

Its sharp-point tip and unique box-thread design make it ideal for most modern wood decking materials.

For seaside and coastal environments, choose 316 (marine) grade stainless steel for maximum durability. However, 304 grade is perfectly suited for all other outdoor uses and can even be used in fresh water - making it a good choice for lake side construction.

Key Points:

Unique box-thread design with raised ridges reduces driving torque.
Sharp-point tip penetrates hardwoods with ease.
6-lobe drive minimizes cam-out and extends driver bit life (replacement bit: BITTX25).
Go for 316 grade stainless steel option over 305 grade for seaside environments and superior corrosion resistance.
Tested to ICC-ES AC233 standards and load-rated for withdrawal resistance.

Specifications

Coating/Material: 305 or 316 grade stainless steel
Screw Size: #10
Drive Type: T25 6-Lobe
Head Type: Flat Head
Thread Type: Box Threads
Point Type: Sharp Point

Simpson Color Matching Guide

(Only applicable to coated screws)

Applications

Deck board installation (hardwood or softwood decking)
Dock and pier construction
Boardwalks and waterfront walkways
Exterior stairs and railings
Fences and gates
Pergolas, gazebos, and outdoor structures
Lakefront and freshwater construction projects
Coastal and marine environments (using 316-grade stainless steel)

COMPATIBLE TOOLS

Recommended Tool per Screw Size

#8 x 1 ⅝"

Quik Drive® Project Pro™

#8 x 1 ¼"

Quik Drive® PRO200SG2 - Currently out of Stock

#10 x 2"

#10 x 2 ½"

#10 x 3"

Quik Drive® PRO300SG2

Need More Assistance?

Feel free to reach out to us!

Quik Drive® PRO300SG2 Decking System

Vendor: Simpson Strong-Tie Type: Quik Drive System

$530.00

Shipping calculated at checkout.

Collated-screw fastening tools are replacing traditional nail guns for their ease of use, reliability, safety and above all, their speed and efficiency. Simpson Strong-Tie's Quik Drive System is an industry...

Configuration: Corded PRO300SG2 Decking System

View Full Details

TECHNICAL SPECS

Allowable Withdrawal Loads and Pull-Through Loads

1. The tabulated allowable screw tension value is the tensile strength of the steel screw and may not be multiplied by any adjustment factors.

2. The tabulated reference withdrawal design value, W, is in pounds per inch of the thread penetration into the side grain of the main member.

3. The tabulated reference pull-through design value, WH, is the allowable load for the fastener head pull-through for a minimum 1 1/2" thick side member.

4. Tabulated reference withdrawal and pull-through design values, W and WH, are shown at a load duration factor, CD = 1.0 and a wet service factor, CM = 1.0. Loads may be increased for load duration per the building code up to a CD = 1.6. Tabulated values must be multiplied by all applicable adjustment factors from the NDS as referenced in the IBC or IRC.

5. Embedded thread length is that portion held in the main member including the screw tip.